Test your drag clicking speed with this free online drag click test. See how many clicks your mouse registers, measure your clicks per second (CPS), and check your peak 1-second click rate. No download or account required.
Runs locally in this page. Your click timings are not uploaded or saved after refresh.
Choose a test duration, perform your drag clicking technique on the mouse button, and review your results instantly.
Important
This tool counts left mouse button presses recorded by your browser. It cannot identify your finger technique, and results depend on your mouse and its settings.
This free drag click test online counts left mouse button presses while you use your drag clicking technique. Available durations: 1 Second, 5 Seconds, 10 Seconds, 15 Seconds(default 5s).
1
Choose a duration
Start with a short 1-, 5-, or 10-second test. Use 15 seconds when you want a slightly longer sample. Only compare runs that share the same duration.
2
Perform your drag clicks
Keep the pointer inside the test area while using your physical mouse button. Fast pointer movement alone does not create extra presses.
3
Review your score
Check total presses, average CPS, peak 1-second CPS, and press intervals. After a run finishes, press the test area again, or use Try again / Reset.
First click starts the run.
The first left-button press on the target starts the timer and counts as press one. If you switch tabs or leave this window, the run stops and we do not show a full score for that attempt.
Technique
What Is Drag Clicking?
Drag clicking is a fast-clicking technique: you move a finger across the mouse button so friction can trigger a rapid series of clicks. On mice that support it, that can raise drag clicking CPS above ordinary single-finger clicking. Results still depend on switch feel, button surface, firmware, and debounce — not every mouse will report a dense burst.
1
Friction, not pointer travel
Extra presses come from the button contact repeating, not from waving the cursor faster. If the browser does not record any button presses, moving the pointer faster will not raise the score.
2
Not every mouse
Coatings, switch type, and firmware filtering differ. A method that works on one mouse can fail on another. Not every mouse supports drag clicking.
3
Stop when it hurts
Drag clicking can stress the finger, wrist, and button surface. Use short runs with breaks. Stop if your hand feels uncomfortable, and do not grind long sessions just to chase a higher number.
Comfort first.
A higher score is not worth strain or extra wear. Short, repeatable tests beat long continuous practice on this page.
The score
How Is Drag Clicking CPS Calculated?
When a run finishes, Average CPS = total clicks ÷ test duration in seconds. The full selected time is always used — not the moment of your last click — so a clean 10-second run always divides by 10.
Peak 1-second CPS is the most presses recorded in any continuous one-second period. It shows your fastest burst rather than your average speed across the whole test.
Click intervals are the gaps between consecutive recorded presses. The median interval summarizes how tightly your registered clicks were packed; min and max show the range.
1
When to trust average CPS
Use average CPS for the whole attempt: same duration, same mouse, same grip. It answers “how many clicks did this run produce overall?” A high peak with a low average often means one short burst and a quieter rest of the timer.
2
When peak 1s matters more
Use peak 1-second CPS to compare your fastest bursts across short runs. A high peak shows how fast you clicked briefly, not how long you could keep that pace.
3
How to read click intervals
A lower median gap means registered clicks sat closer together. Large min–max spreads can mean uneven bursts or dropped repeats. Intervals need at least two clicks; a single click leaves gaps blank on purpose.
Average vs peak vs interval
Average describes the full run, peak describes your fastest second, and median gap describes spacing. Together they are what make this drag click CPS test different from a single overall average on a regular CPS test.
Your results stay in this tab only and clear when you refresh. Seehow we measure for what this test can and cannot do.
Troubleshooting
Why Is My Drag Click Test Not Registering Multiple Clicks?
If the counter barely moves while you drag across the button, the browser is simply not receiving repeated left-button presses. Common reasons:
1
Mouse hardware
Some switches and button surfaces do not produce repeated presses from a drag motion, even when the technique feels right.
2
Firmware or debounce
Mouse firmware and debounce settings may suppress very close repeats so the OS never sees them as separate clicks.
3
Operating system or browser differences
Your operating system or browser may filter out some rapid presses, so your score here can differ from what you see in a game.
4
Technique or grip
Your grip and finger movement affect how many presses you produce. Try a short test with normal clicking on the same mouse for comparison.
A low score does not mean your mouse is broken
Some mice work normally but do not register drag clicks reliably. To check whether your buttons respond to ordinary presses, use the mouse test.
Compatibility
What Mouse Works for Drag Clicking?
Mouse shape, button coating, switch type, and firmware all affect drag clicking. A mouse that scores well for one person can score poorly for another with a different grip.
Try the mouse you already own. Keep the test duration and grip the same when comparing results. Your score shows how many presses your browser recorded, not which mouse you should buy.
Related tests
Drag Click Test vs. Mouse Drag Test
Drag clicking produces repeated clicks. Dragging means holding a button while moving the pointer. Choose the test that matches what you want to check:
Test
Purpose
Drag Click Test (this page)
Measures how many left-button presses the browser receives while you drag click, plus average CPS, peak 1-second CPS, and press intervals.
Measures ordinary fast clicking pace over a timed run. Best for general left-click CPS, not technique-specific drag clicking stats.
Mouse Drag Test
Checks whether holding a button and moving the pointer behaves continuously. That is drag movement, not repeated clicking — this site does not offer that tool.
Compare with a regular CPS test
To see whether drag clicking changes what the browser records, run the same mouse and the same duration once here and once on theregular CPS test (normal clicking, no drag technique). Keep grip and device fixed; only change the clicking method. This page counts each left-button press, while the regular CPS test counts completed clicks (press and release), so the scores may differ.
Use the regular CPS test when you only need your average clicks per second.
A drag click test counts the left mouse button presses your browser records while you drag click. It shows total presses, average CPS, your fastest one-second burst, and the time between presses.
How do I test my drag clicking CPS?
Choose a test duration, perform drag clicking with your physical mouse button inside the test area, and review the presses recorded by your browser. The first press starts the timer. Keep the pointer on the target until time runs out. After a run finishes, press again to retest.
How do you calculate drag clicking CPS?
Average CPS is the number of recorded presses divided by the test duration in seconds. Peak 1-second CPS is the most presses recorded in any continuous one-second period. Each left mouse button press counts; you do not need to release the button for that press to be counted.
Can you drag click on any mouse?
No. Results vary with the mouse switches, button surface, firmware, and settings. Some mice may not reliably register repeated presses from a drag motion. Compare runs on the same mouse and duration.
Why is my drag click test only counting one click?
Your mouse may not be generating repeated button presses, or the device, firmware, operating system, or browser may be filtering them. Moving the pointer quickly without pressing the left mouse button will not raise the score.
What is the difference between a drag click test and a mouse drag test?
A drag click test measures repeated button presses. A mouse drag test checks pointer movement while a button is held down. For ordinary left-click speed without drag-clicking focus, use the regular CPS test. For two-finger alternation on one button, use the butterfly click test.
Related pages
CPS test — regular left-click speed / clicks per second